|
PSI Woodworking LCSIXW High Speed Steel Wood Lathe Chisel Turning Set, 6-Piece |  | Brand: PSI Woodworking
Category: Home Improvement
List Price: $79.95
Buy New: $70.46
as of 9/3/2010 21:42 CDT details
You Save: $9.49 (12%)
Seller: Amazon.com
Rating:  reviews
Media: Tools & Hardware
Shipping Weight (lbs): 8.3
Dimensions (in): 24 x 2.5 x 12.8
Model: LCSIXW
UPC: 689076541596
EAN: 0689076541596
ASIN: B000KIECW4
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules | | • | Blades range from 6.5-Inch to 9-Inch In length | | • | Chisels range in overall length from 16-3/4-Inch to 22-3/8-Inch | | • | Includes 3/8-Inch spindle gouge, 7/8-Inch roughing gouge, 1-Inch oval skew chisel, 3/8-Inch bowl gouge, 3/16-Inch diamond parting tool, 3/4-Inch round nose scraper | | • | Comes in an attractive wooden display box |
| |
| Customer Reviews:
 Good basic set April 15, 2010
A. Brookman (Washington DC)
1 out of 1 found this review helpful
After a lot of research I picked up this set. These are not the best as the others have said but I dont think you'll find a better set under $100.
Cons:
The handles and box feel cheap.
The HSS seems to be softer than most other cutlery HSS I've handled. As a result they need to be sharpened more frequently.
The edge is very quick to get a sharpening burr. If you're not familiar with the proper procedure for removing a burr you'll need to look it up. As a result quick passes over the bench grinder with a jig are not sufficient to make a lasting edge.
The factory edges are pretty poor.
Pros:
The handles are a great length which provides plenty of leverage and are not loose.
Since the HSS is soft it takes a new edge very quickly. All 6 tools can be brought to hair popping sharp in about 10 mins with a couple of bench stones.
Once sharpened they work almost as well as my carbide tools. Nearly effortless cutting for much longer than I would expect from cheap HSS. (After putting a very fine edge with a set of bench stones)
Price is about half of what other sets of similar caliber sell for.
I dont think you'll find a better set on amazon. If I were to upgrade from this set I'd buy a full set of carbide tools but I dont use them enough to warrant the 3 or 4 fold price increase.
PSI Woodworking LCSIXW High Speed Steel Wood Lathe Chisel Turning Set, 6-Piece March 5, 2010
Timothy A. Vanderlaan (Goldsboro, NC)
Nice set of Chisels. I turn smaller items on a Jet lathe and use my smaller chisel set more. But the large chisels have worked well for bowls and smaller jobs as well. This set wasnt the most expensive or the cheapest out there, but the quality is good! For the average user this is a great set of chisels that will not disapoint.
Good value for getting started May 1, 2009
Tim in Mint Hill (Charlotte, NC USA)
2 out of 2 found this review helpful
I have just started turning wood, mainly bowls, and needed a couple tools in this set...mainly a small bowl gouge, decent parting tool and bowl scraper. I already had a similar roughing gouge included, so it's useful too. The skew chisel...probably just me...haven't got knack of it yet and I occassionally use the spindle gouge but already had one.
Ok, that being said, I had no problems with the case being cracked...but don't care, as I don't keep the tools in a box...I keep them where I get to them fast.
They seem to keep their edge a little less than the Sorby gouge I have, but not a huge difference here.
All in all, a great set to get started, especially making bowls, though you really need a larger bowl gouge (1/2" min) to really be steady with making anything bigger than say 4" diameter bowl or so.
As others have said, it's a great way to get started using the tools and deciding where to put extra money improving on any of them. Good example, is I'll definitely invest in a beefy scraper...no substitute for having a good heavy cross section to prevent vibration when reaching inside a bowl with a scraper. Aside from that..I'll probably continue to use these tools for quite a while, only having to invest in perhaps some unique items such as the curved vessel scraping/turning tools to get inside really well on vessels.
Again...very good starting set, a good value.
 IT IS TRUE...! February 27, 2008
Mr. Geweke (Tucson Az US)
2 out of 3 found this review helpful
Do not expect the box to make it thru shipping, Amazon could do a better job of packing but a little glue cures the box problem. Now the LATHE TOOLS are a very good beginners set. Quality tools good enough for getting into wood turning without spending $200 just to see if you like it. NOTE: They really do need to be honed to a fine edge.
Pleasantly surprised how good these are! January 16, 2008
EZEZEZEZEZEZEZ (somewhere, United States)
5 out of 5 found this review helpful
These aren't quite Sorby's but heck one Sorby chisel could cost you what this whole set costs. Since, we are comparing with other manufacturers these also are a HUGE step up from the HF "red handled" chisels that get fairly good reviews. These Benjamins Best are a bit more initially but since the HF set doesn't come with a bowl chisel it would end up being about the same cost.
This Benjamins Best LCSIXW is really nice for the price. I am totally satisfied with the M2 HSS blades on these, they are nice and thick and hold an edge very well.
The only weakness is that the handles aren't spectacular but they are serviceable and you could certainly turn your own handles and replace them if you chose. They actually have a nice feel to them but the fit and finish of the handles themselves isn't great. Again, more of a cosmetic issue than anything else.
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME. | |
