|
All in One Clamp T-50 50-Inch Double Grip Bench Clamp with T-track | 
| Brand: E. Emerson Tool Co
Category: Home Improvement
List Price: $69.99
Buy New: $49.26
You Save: $20.73 (30%)
Rating:  4 reviews
Media: Tools & Hardware
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 7
Dimensions (in): 60 x 5.6 x 2.6
MPN: T50
Model: T-50
UPC: 894837000063
EAN: 0894837000063
ASIN: B0000DYVA9
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | T-track accepts a variety of accessories: stops, router plates, framing blocks | | • | Profile thickness matches 3/4" plywood | | • | T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps | | • | Doubles as a bench clamp for easy work holding | | • | 0 |
|
| Editorial Reviews:
Product Description
Twin Clamps are designed specifically for assembly projects. The twin has two clamps built into one aluminum straight edge. One clamp faces down to hold your work table, the other clamp faces up to hold your project. The Twin, especially when used in pairs, simplifies gluing up drawer assembly and work holding for planing or sanding. The Twin has a straight edge, like our other straight clamps and will accept the Saw & Router Plate Accessories. Wide jaws can ease assembly problems. Remember, the clamp lever has three power levels so you can pull together any wood stock.
Amazon.com Product Description
The All in One Clamp T-50 50-Inch Double Grip Bench Clamp with T-track is a versatile bench clamp that also serves as fence and power tool guide. This clamp helps provide smooth, accurate sawing and routing on a variety of projects, and is completely adjustable for use with both drill presses or bandsaws. The T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps, and it makes it easy to use accessories. This 50-inch clamp is has a 3/4-inch plywood profile thickness.
|
| Customer Reviews:
 Clamp February 7, 2007
William E. Esmonde (Sumter, SC)
2 out of 2 found this review helpful
Great piece to add to your collection. It holds really well and is a great help in ripping plywood panels.
A well made tool January 26, 2007
Dominic (Harrison twp, MI)
8 out of 8 found this review helpful
I bought this because it is too clumsey to cut 4x8 sheets of plywood on a tablesaw unless you have one with the large table extention. I have tried to use a board and other things for straight edges and clamp them to the work with less than perfect results. This tool is made of a heavy aluminum extrustion which will not flex out of shape. The locking arm has three positions, light,medium,and full lock. You slide the other clamp block back and forth to set the grip length. This model has a clamp on both sides so you can clamp it to a workbench and then use the top clamp to hold your work in place. I gave this 4 stars because it does not clamp at an angle. The important thing is when you want to make a straight cut you dont want to fool around aligning and clamping and reclamping. This tool is fast to use and clamps very tight and stays put till you release it.
Excelent easy to use tool - Recommended. July 31, 2005
lake arns (Texas&Michigan USA)
16 out of 16 found this review helpful
I bought the T-50 50" Double Grip Bench Clamp with T-track for a large acrylic project. Cell cast acrylic sheets, 1/2 and 3/8" thickness, were cut with the T-50 as a guide for my circular saw. The T-50 is light for its size, is easy to allign and clamps well - lots of force and without losing my allignment. It held the acrylic well while the cuts were made - even 48" cuts while clamped on smooth acrylic edges. I was able to hold very close tolerances on all cuts, exceeding my expectations.
I have also used the T-50 on additional projects - including particle wood and plywood - usually as a router or saw guide. It has performed well on all occasions.
|
|
|
| |
